Note : we don't soldering the interface ,because some people like 2.54mm straight Double Male Headers and others like 2.54mm Double Bended Male Headers.

So this is very convenient for your projects and you can soldering as you like.
 

 

Module size 75 * 53mm.
There are two 3mm mounting holes and interface is spacing 2.54mm 2*20 pins.


4、Interface Definition :
 

 

5、Pin Definition :

1、GND
2、VCC : +3 V DC power supply (Note that voltage can not be more than 3.3V)
4、RS : register selectio, data register when high, command register when low
5、WR : write
6、CS : Chip Selection,  low Level is effective
7-14、DB8-DB15 : data line
17、RST
19、LEDA
20、LEDK
21、DCLK : 2046 clock
22、DCS : 2046 chip selection, effective when low
23、DIN : 2046 data input
24、BUSY : 2046 busy signal output
25、DOUT : 2046 data output
26、PENIRQ : 2046 Interrupt output
27-34、DB0-DB7 : data line
38、RD

Notice ： VCC is 3V and the RD connect with VCC when you don't use RD.

6、 Reference circuit :
 

 

7、Click to Download the reference TFT Document Zip


The Document Zip include as below :
 

    * TFTScreenbreakout.Sch              Schematic of the TFT(Protel DXP File)
    * 240374PQ.pdf                           Screen datasheet
    * ILI9325.pdf                               Screen controller datasheet
    * ADS7843.                                  Touch controller datasheet
    * InterfaceCAD.DWG                    TFT CAD file
    * ITDB02Spe.pdf                         TFT specification
    * PinOut.jpg                                Pin map of the 40 pins interface
    * Readme.txt                               Note
    * Test Code.PDF                          Test Code.PDF   

Tell a friend

Your e-mail*	Required
Enter Your Friend's E-mail Address(es)*	Required Please separate emails by comma. e.g. anne@example.com,sam@example.com
Subject*	Required
Message*	Required