Arduino MMA7260 Triaxial Acceleration Sensor

This module have update to Arduino MMA7260 Triaxial Acceleration Sensor V2.0


It adapt three acceleration（Xg、Yg、Zg）sensor of Freescale MMA7260,and it supply 1.5g、2g、4g、6g four grade acceleration range and the sensitivity range is 600, 300, 800 200mV/g. Available in the robot, intelligent vehicle, free fallers detection, and what has higher detection sensitivity etc, it can carry out three-dimensional XYZ axial detection, make  corresponding equipment can respond to position, orientation and mobile changes.

Special note: don't inserted and pull the module directly when you don't turn off the power, otherwise it may be damaged, before using this module ,you would better clear static elimination of body, otherwise that may damage the module!

This electronic bricks will extract all pins of X/Y/Z interface,and  you may be directly connect with the sensor shield through sensor cable or analog sensor cable, it support plug and play. The GS2 and GS1 switch can be used to choose the range .

note: don't inserted and pull the module directly when you don't turn off the power, and you would better clear static elimination of body

More information about MMA7260: www.freescale.com/files/sensors/doc/data_sheet/MMA7260QT.pd

Low power consumption !
this module contains 5V circuit, all 3.3 V foot are drawn, can very easily be connected.




This module have update to Arduino MMA7260 Triaxial Acceleration Sensor V2.0