Smart Oscilloscope DS0201 V1.5-Kits

Description :

     DS0201 is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. It is base on ARMCortex^TM-M3compatible 32 bit platform, equipped with 320*240 color display, SD card capability, USB connection, and chargeable batteries. Weighs only 60g! Portable Digital Oscilloscope DIY Kit provides waveform viewing, pocket size and over 2 hours battery operation. This DIY kit is a open source code. The Schematic, PCB layout and program code is free for re-design. It is ideal for production test, research, design and education.
  

New features compared with V1.4：

  1、connectors are added between 2 PCB board.
  2、modified the circuit layout of inputting part.
  3、using thin-film keypad, not need the gasket any more.
  4、MCX precision plug probe is used.

Specification :

Display	2.8″ Color TFT LCD
Display Resolution	320*240
Display Color	65K
Analog bandwidth	0 - 1MHz
Max sample rate	1Msps 12Bits
Sample memory depth	4096 Point
Horizontal sensitivity	1uS/Div～10S/Div (1-2-5 Step)
Horizontal position	adjustable with indicator
Vertical sensitivity	10mV/Div～10V/Div (with 1 probe)
	0.5V/Div～10V/Div (with 10 probe)
Vertical position	adjustable with indicator
Input impedance	>500KΩ
Max input voltage	80Vpp (by 1 probe)
Coupling	DC
Trig modes	Auto, Norma, Single, None and Scan
Functionalities:	Automatic measurement: frequency, cycle, duty, Vpp, Vram, Vavg and DC voltage
	Precise vertical measurement with markers
	Precise horizontal measurement with markers
	Rising/falling edge trigger
	Trig level adjustable with indicator
	Trig sensitivity adjustable with indicator
	Hold/run feature
Test signal	Built-in 10Hz～1MHz (1-2-5 Step)
Waveform storage	SD card
PC connection via USB	as SD card reader
Upgrade	by bootloader via USB
Power supply	3.7V Chargeable Lithium battery / USB
Dimension (w/o probe)	105mm X 53mm X 8mm

     PC connection: Mini USB B-Type

 

Setup your SD card for first time usage :

 

      1. Format SD card with FAT16

      2. Download Datafile

      3. Decompress it, and copy to the root folder of SD card.

Package List：

       1、DSO201  body x 1

       2、3.7v lithium battery with connector x 1

       3、Back plate x 1

       4、Mini Probe x 1

Free Gift：

       1、DSO201 bag  X1


Download： Software

Note :  The device has been calibrated. To use it, the only thing you have to do is assemble it.