Digital Vibration Sensor -Black
By using electronic bricks, you may connect Arduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos...even buttons, just plug and play.
Each terminal module has buckled port with VCC, GND and Output, which has corresponding port on the sensing board, with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.
It is very interesting Electronic Brick Module
This module can be used with Arduino Special Sensor Shield V4.0.
You can do some simple design about it，it support“plug and play”。
This vibration sensor is just as its name which is able to detect weak vibration signals.
This item is a digital Plug and Play sensor blocks. It has vibration switch digital input module and dedicated sensor expansion boards with the Arduino in combination. It can sense the weak vibration signals, which can be realized with the shock interaction with relevant works.
Product Performance :
The conductive pin will make an instant turn-on (ON) state when touched by the outside force to achieve the proper vibration force, or an appropriate speed from the (partial) energy.
No direction, any angle may burst.
The switch is suitable for small-current circuit (secondary circuit) or (IC) of the trigger.
At room temperature and normal use the next switch service life is up to 10 million times (times/1sec).
IO Type: Digital
Switch life: up to 10 million seconds
Open circuit resistance: 10Mohm
Connecting Diagram :
This sensor module come with 3 Pin Dual-female Jumper Wire length 300mm as below :
Join our newsletter today, to get latest product information and promotion code.Loading ...